| Power Supply (Volts) | Not Applicable |
| PLC module type | Analog Output |
| Output mode | Not Applicable |
| Digital Input Type | Not Applicable |
| Numeric Inputs (points) | 0 |
| Digital Outputs (Points) | 0 |
| Analog Inputs (points) | 0 |
| Analog Input Signal Type | Not Applicable |
| Analog Output Signal Type | Not Applicable |
| I/O power supply / connector module | Not Applicable |
| Analog Outputs (points) | 4 |
| Pulse Inputs (points) | 0 |
| Pulse Outputs (points) | 0 |
| Thermocouple Inputs (points/pins) | 0 |
| RTD Inputs (points) | 0 |
| Pulse Input Frequency (kHz) | 0 |
| Pulse Output Frequency (kHz) | 0 |
| Analog Input Resolution (bits) | 0 |
| Analog Output Resolution (bits) | 12 |
| Analog input specifications | Not Applicable |
| Analog output specifications | 0V ~ 10V, 0mA ~ 20mA |
| Maximum digital I/O count | 0 |
| Maximum number of analog I/O modules | 0 |
| Expansion direction | Right |
| Number of modules on the left | 0 |
| Module count on the right | 0 |
| RIO support | Not Available |
| Pulse output type | Not Applicable |
| LoadCell resolution (bits) | 0 |
| LoadCell points | 0 |
| LoadCell sensitivity | Not Applicable |
| Generic inputs | Not Available |
| Program Memory (K steps) | 0 |
| Maximum RIO station | 0 |
| Number of expansion racks | 0 |
| Backplane type | Not Applicable |
| Backplane slots | 0 |
| Number of axes | 0 |
| High-speed counting | 0 |
| Current Consumption (mA) | 0 |
| Pulse output frequency 2 (kHz) | 0 |
| Pulse output 2 (dots) | 0 |
| Pulse input frequency 2 (kHz) | 0 |
| Pulse input 2 (dots) | 0 |
USD
- USD
- CNY
- HKD
- EUR
English
- العربية
- čeština
- dansk
- Deutsch
- Ελληνικά
- English
- Español
- Français
- ic
- Italiano
- Netherlands
- norsk Språk
- język polski
- pt
- Português
- 中文
Delta
DVP04DA-S
DVP04DA-S
Subscribe to get pricesModel: DVP04DA-S
Order No: Delta DVP04DA-S
SKU: 10000009167601
Condition: New Sealed Under Guarantee
Size: 11.50 cm,9.60 cm,6.70 cm
Weight: 0.20kg
Product Selection Engineer:ZhangWenBing
In Stock
Brief Introduction
DVP04DA-S
DVP04DA-Sanalog output module, 4 points - voltage 0V ~ 10V, current 0mA ~ 20mA, 12-bit resolution, built-in RS-485 interface
Description
Unsubscribe
Subscribe